点击图片查看原图
件 库存100件
[VIP第1年] 指数:2
通过中国电气传动网认证 
Perle工业级以太网交换机设计用于应对工业自动化，政府，军事，石油和天然气，采矿和户外应用中的极端温度，浪涌，振动和冲击。IDS-105G是一款5至7端口工业千兆以太网交换机，可提供先进的性能，实现实时确定性网络操作。 它不需要配置，一旦启动就会立即运行。
The IDS-105G which comes in a variety of models with 5 copper ports, 5 copper ports plus 1 fiber port or 5 copper ports plus 2 fiber ports. All are rugged fan-less switches that are hardened to provide superior reliability in 0 to 60°C, or harsh extended operating temperatures from -40 to 75°C.
Perle has been designing industrial hardware for serial ModBus and Profinet to Ethernet conversion environments for over 35 yearsand have used this expertise to design the toughest Ethernet switches on the market. Don’t trust your critical communications to commercial switch products. Perle Industrial Ethernet switches give you proven assurance that your system will keep running for years to come.
IDS-105G Industrial Gigabit Ethernet Switch Features
| Rugged design for harsh environments |
|
| Reliable operation |
|
| Real-time Ethernet performance |
|
| Jumbo frames | Supports Jumbo frames up to 10 KB |
| Energy Efficient Ethernet ( EEE ) | Energy Efficient Ethernet (EEE) as per 802.3az. This provides power savings during idle network activity. |
硬件：
| Power | |
|---|---|
| Dual Power Input | Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch. 12/24/48 VDC Nominal. ( 9.6 to 60 VDC) 18 to 30 VAC |
| Power Connector | 4-Pin Removable Terminal Block Grounding screw on metal chassis |
| Maximum Current Consumption @24 vDC | 500 mA |
| Maximum Power Consumption @24 vDC | 12.0 Watts |
| Overload Current Protection | Reset-able fuse provides overload current protection |
| Reverse polarity protection | The positive and negative inputs can be reversed providing safe and simple power connectivity. |
| Access Ports | |
| RJ45 | 5 shielded RJ45 ports for 10/100/1000base-T up to 100 meters ( 328 ft ) Auto-negotiation Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types Ethernet isolation 1500 V |
| Small Form Factor Pluggable ( SFP ) slot(s) | 1 or 2 empty SFP slot models for 1000base-X SFP modules supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs |
| Fixed Fiber port | 1 x fixed fiber port Duplex SC or ST connector
|
| Switch Properties | |
| Standards |
|
| Processing Type | Store and Forward, non-blocking architecture |
| MAC Address Table Size | 8K |
| Packet Buffer Memory | 1 Mbit |
| Jumbo frame Size | 10 KB |
| Indicators | |
| P1 | This green LED is turned on when power is applied to the power #1 input |
| P2 | This green LED is turned on when power is applied to the power #2 input |
| RJ45 Ethernet | These integrated colored LEDs indicate link, activity and speed for each port. |
| Fiber link | Fiber link LED indicates link and Data Activity |
| Environmental Specifications | |
| Operating Temperature Ranges | Standard temperature models : 0° C to 60° C (32° F to 140° F). Industrial extended temperature models : -40° C to 75° C ( -40 F to 167° F ) |
| Storage Temperature Range | Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models |
| Operating Humidity Range | 5% to 90% non-condensing |
| Storage Humidity Range | 5% to 95% non-condensing |
| Operating Altitude | Up to 3,048 meters (10,000 feet) |
| Chassis | Aluminum with an IP30 ingress protection rating |
| Din Rail Mountable | DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175. Removable to accommodate optional Panel/Wall mount kit |
| Maximum Heat Output | 41 BTU/Hr |
| MTBF | 696,618 hours (without fiber module) 522,423 (with fixed fiber module) 489,383 hours (with 1 SFP slot) 385,036 hours (with 2 SFP slots) MTBF Calculation model based on MIL-HDBK-217-FN2 @ 30 °C |
| Product Weight and Dimensions | |
| Weight | 0.32 Kg, 0.7 lbs |
| Dimensions | 35.5 x 111 x 138 mm, 1.39 x 4.37 x 5.43 inches |
| Packaging | |
| Shipping Weight | 0.47 Kg, 1.04 lbs |
| Shipping Dimensions | 170 x 260 x 70 mm, 6.69 x 10.24 x 2.76 inches |
| Contents Shipped | Industrial Ethernet Switch with DIN Rail attachment Terminal block Installation guide |
| Standards and Certifications | |
| Safety | UL 60950-1 CSA C22.2 No. 60950-1 IEC 60950-1:2005+A1:2009 and EN 60950-1:2006+A11:2009+A1:2010+A12:2011 CE Mark UL508 ( Industrial ) |
| EMC Emissions | FCC 47 Part 15 Class A ICES-0003 CISPR 22:2008/EN55022:2010 (Class A) EN61000-6-4 |
| EMC Immunity | CISPR 24:2010/EN 55024:2010 IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kV, Air Discharge +/- 8kV IEC/EN 61000-4-3 (RS) : 80 MHz to 2.7 Ghz ; 10V/m, 800 MHz to 1000 MHz; 20V/m IEC/EN 61000-4-4 (EFT) : DC power line +/- 2 kV, Data Line +/- 2kV IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kV, Line/Earth +/- 2kV, Data Line line/earth +/- 1kV IEC/EN 61000-4-6 (CS) : 150kHz to 80 MHz; 10V IEC/EN 61000-4-8 (Magnetic Field): 30 A/m IEC/EN 61000-6-2 ( General Immunity in Industrial Environments ) |
| Industrial Safety | UL508 (Safety standard for Industrial Control Equipment ) CSA C22.2 No. 142 |
| Hazardous Locations ( Hazloc ) | ANSI/ISA 12.12.01, Class I Division 2 Groups A-D ( formerly known as UL 1604 ) CSA C22.2 No. 213 ATEX Class I Zone 2, EN60079-0,15 |
| Laser Safety | EN 60825-1:2007 Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11. |
| Environmental | Reach, RoHS and WEEE Compliant |
| Other | ECCN: 5A991 |
| HTSUS Number: 8517.62.0050 | |
| 5 year warranty | |
选型：
