IDS-409C是一款9端口管理型以太网交换机，可在工业环境中运行，提供高级性能并支持实时确定性网络操作。 五个10/100 / 1000-base-T以太网端口可用于联网千兆和快速以太网设备。 其他四个端口可配置为使用100 / 1000base-X SFP光纤或10/100 / 1000base-T。 这种灵活性可以轻松适应网络增长和变化。
Data corruption over copper-based Ethernet links can be caused by high levels of electromagnetic interference ( EMI ) in environments like industrial plants. Utilizing fiber is the solution. Data transmitted over fiber optic cable is completely immune to EMI noise ensuring optimal data transmission across the plant floor.
Perle Industrial-grade Ethernet Switches are designed to stand up to extreme temperatures, surges, vibrations, and shocks found in industrial automation, government, military, oil and gas, mining and outdoor applications.
The simple Plug and Play installation available in Perle’s Fast Setup feature gets your Ethernet devices networked immediately. CCNA( Cisco Certified Network Associate ) and CCNP ( Cisco Certified Network Professional ) trained engineers will appreciate the familiar Command Line Interface ( CLI ) via in-band Telnet or the out-band serial console port.
An IPv6 address can be used to manage the IDS-205G which also supports a comprehensive set of management functions, such as P-Ring, management VLAN, QoS, RMON, N:1 port mirroring and local alert log.
The IDS-409C, which comes in a variety of models, are rugged fan-less switches that are hardened to provide superior reliability in -10 to 60°C, or harsh extended operating temperatures from -40 to 75°C. Every component on every industrial (XT) model has been designed and tested to handle operating temperatures between -40 and 75C.
All Perle Industrial Ethernet Switches have a corrosion resistance aluminum case and dual redundant power input with reverse polarity and overload protection. In addition, all units only use high-end components from the leading chip manufacturers to ensure the highest level of durability and reliability.
Perle has been designing industrial hardware for over 35 years and have used this expertise to design the toughest Ethernet switches on the market that will keep your system running for years to come.
IDS-409C Industrial Managed DIN Rail Switch Features
Zero-touch discovery using Dynamic Host Control Protocol (DHCP), Perle’s “Fast Setup” for first time installation, provides simple deployment in Ethernet environments
Web Device Manager, Telnet, SNMP and Perle’s PerleView NMS for centralized management
In-band management via RJ45 or USB serial ports
Use an IPv4 or IPv6 address
Removable MicroSD flash for configuration files and firmware backup and restoration
Rugged design for harsh environments
Corrosion resistant case
Programmable Controller Safety certified
Certified for hazardous locations
Extended industrial temperature models
Fan-less, no moving parts
Dual power input. Connect to separate power sources for redundancy.
Handles vibration and shock conditions found in industrial environments
Real-time Ethernet performance
Fast wire-speed , store and forward switching
Auto-sensing for speed and duplex
Auto-mdi/mdix-crossover works with straight and crossover cables
Auto-sensing of port speed and auto-negotiation of duplex on all switch ports for optimizing bandwidth
Medium-dependent interface crossover ( Auto-MDIX ) capability on 10/100 and 10/100/1000 mbps interfaces that enables the interface to automatically detect the required cable type ( straight thru or crossover ) and to configure the connection appropriately
|802.3x flow control|
IEEE 802.3x flow control on all ports. ( The switch does not initiate pause frames )
Storm control prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on one of the physical interfaces. A LAN storm occurs when packets flood the LAN, creating excessive traffic and degrading network performance. Storm Control enables limits to be placed on broadcast, multicast and unicast traffic
|Static MAC Addressing|
This feature enables the manual configuration of the MAC addresses on a per port basis. Flooding is prevented by retaining MAC entries across a reboot of the switch.
Port Blocking provides the ability to block the flooding of unknown layer 2 unicast and multicast traffic on an Interface
|IPV4 IGMP Snooping|
Internet Group Management Protocol ( IGMP ) constrains the flooding of multicast traffic by dynamically configuring Layer 2 interfaces so that multicast traffic is forwarded to only those interfaces associated with IP multicast devices.
IGMPv1, v2, v3, IGMP snooping querier mode, IGMP report suppression, topology change notification and robustness variable features are supported
|Port Quick Disconnect|
In some network environments, it is desirable to move an Ethernet from one switch port to another and have the device come on-line quickly. The Port Quick Disconnect feature if enabled, provides an immediate age-out of the MAC addresses learned on the port when the port status changes from a link-up to a link-down state
|Web Device Manager|
The Perle Web Device Manager is an embedded Web based application that provides an easy to use browser interface for managing the switch. Unlike competitive products, Java applet technology is not required or used
|Command Line Interface ( CLI )|
A familiar text-based Command Line Interface that is based on accepted industry standard syntax and structure. Ideal for CCNA and CCNP trained engineers, this interface is available via in-band Telnet or the out-band serial console port
Manage the switch with an SNMP compatible management station that is running platforms such as HP Openview or Perle’s PerleVIEW NMS. SNMP V1 and V2C
PerleVIEW is Perle’s SNMP-based network management system that provides a view of the network with a large scale of Perle networking devices.
Manage with an IPv4 or IPV6 address
|DHCP Client Auto-Configuration|
Automates configuration of switch information such as IP address, default gateway, hostname and Domain Name System ( DNS ) as well as TFTP server names. Firmware and configuration file locations are provided through options 54, 66, 67, 125 and 150
DHCP Relay is used for forwarding requests from DHCP clients when they are not on the same physical subnet. As a DHCP relay agent the switch operates as a Layer 3 device that forwards DHCP packets between clients and servers.
|DHCP Option 82 Insertion|
Normally used in metro or large enterprise deployments DHCP Option 82 insertion is used to provide additional information on “physical attachment” of the client. As per RFC 3046, option 82 enables additional pre-defined information to be inserted into the DHCP request packet ( for DHCP Servers that support this option )
LLDP-link Layer Discovery Protocol as per IEEE 802.1AB is a neighbor discovery protocol that is used for network devices to advertise information about themselves to other devices on the network. This protocol runs over the data-link layer, which allows two systems running different network layer protocols to learn about each other ( via TLVs – Type-Length-Value )
Firmware can be transferred via TFTP, HTTP or via insertion of a microSD card. Text-based files that can be created or edited by common text editors.
|Availability and Redundancy Features|
|Spanning Tree Protocol ( STP )|
IEEE 802.1D now incorporated in IEEE 802.1Q-2014, STP prevents bridge loops and the broadcast radiation that results from them.
|Rapid Spanning Tree Protocol ( RSTP )|
Interoperable with STP, RSTP ( IEEE 802.1w ) takes advantage of point-to-point wiring and provides rapid convergence of the spanning tree. Reconfiguration of the spanning tree can occur in less than 1 second
P-Ring provides an easy to use method for configuring a ring network using standard spanning tree protocols.
Prevents a switch loop scenario in a ring topology.
|link Standby||A link recovery feature using a primary and backup link. Provides a simple alternative to spanning tree protocols for link redundancy|
Up to 256 VLANS across a VLAN ID range of 1 to 4000
Perle switches provide the ability to configure management VLAN interfaces. This enables network administrators to access the switch’s management interface from separate VLAN networks
|Quality of Service ( QoS ) and Class of Service ( CoS ) Features|
IP ToS/DSCP and IEEE 802.1p CoS
Weighted Fair Queuing or Strict Queuing
|Egress Queues and scheduling|
N:1 Port Mirroring is a method of monitoring network traffic. With port mirroring enabled, the switch sends a copy of one or more ports to a predefined destination port. Selection of Transmit, Receive frames or both can be made
RMON statistics provided for statistics, history, alarms and events for network monitoring and traffic analysis
Facility for logging systems messages to an external SYSLOG server
Facility for logging systems messages locally
Layer 2 traceroute to identify the path that a frame takes from source to destination
|SFP Diagnostics and Monitoring|
Interface provided to the SFP’s Digital Optical Monitoring facility to monitor operational or physical operating status of the SFP and link
|Power Supply Monitoring|
Provides the status of power supplies of the switch
The switch can monitor global switch conditions as well as individual ports. These alarms can be configured to send messages to ;
Global Status Monitoring Alarms
Port Status Monitoring Alarms
link Fault Alarm ( IE loss of signal )
Port not forwarding alarm
Port not operating alarm ( failure upon start up tests )
FCS Bit error rate alarm
When enabled, energizes the built-alarm relay triggering an external alarm circuit such as a bell, light or other signaling device according to alarm conditions set
|Management and Standards|
IEEE 802.3 for 10base-T
IEEE 802.3u for 100baseT(X) and 100baseX
IEEE 802.3ab for 1000base-T
IEEE 802.3z for 1000baseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.3ad for Port Trunk with LACP
IEEE 802.1AB LLDP
|SNMP MIB Objects|
Dual Power Input
Both inputs draw power simultaneously. If one power source fails, the other live source can, acting as a backup, supply enough power to meet the operational needs of the switch.
12/24/48 VDC Nominal. ( 9.6 to 60 VDC)
24 VAC Nominal ( 18 to 30 VAC )
4-Pin Removable Terminal Block.
Grounding screw on metal chassis
|Maximum Current Consumption @24 vDC||0.78 amps|
|Maximum Power Consumption @24 vDC||18.8 watts|
Overload Current Protection
Fused overload current protection
Reverse polarity protection
The positive and negative inputs can be reversed providing safe and simple power connectivity.
5 shielded RJ45 ports for 10/100/1000base-T up to 100 meters ( 328 ft )
Auto-MDI/MDIX-crossover for use with either crossover over straight-through cable types
Ethernet isolation 1500 V
RJ45 Serial Console port
Optional rolled and straight thru RJ45 cables and DB adapters are available
USB Serial Console port
MicroUSB Type B female port for serial console management. Used as an alternative port for out of band management connections
|Digital Inputs||Two Digital Inputs are provided that can be used for generation of alarms ( SNMP trap, energizing of on-board Alarm Relay,etc )|
Dual Purpose Combo ports
Four Combo ports are provided
A Dual-purpose Combo port is a single port with two interfaces, one for an RJ-45 10/100/1000base-T cable and another for an SFP fiber module. only one interface can be active at a time. This provides flexibility in environments where the type of connection ( copper or fiber ) may change.
IEEE 802.3 for 10base-T
IEEE 802.3u for 100base-TX and 100base-FX
IEEE 802.3z 1000base-X
IEEE 802.3ab for 1000base-T
Store and Forward
MAC Address Table Size
VLAN ID range
1 to 4000
Packet Buffer Memory
This LED is turned on when the appropriate level of voltage is applied to one or both of the power inputs
Indicates whether the switch O/S is operating normally
These integrated colored LEDs indicate link, activity and speed for each port.
Fiber link LED indicates link and Data Activity
The alarm LED ( Red ) will be turned on under alarm conditions
P-Ring Master LED
Status of the P-Ring Master
Backup Network Coupling
Indicates whether or not the “Backup Network Coupling” feature is enabled ( Redundant links connecting two P-Ring networks )
|External Configuration DIP Switches|
When enabled, designates this switch as the Ring Master
Activate Backup Coupling between 2 ring networks
Calculation model based on MIL-HDBK-217-FN2 @ 30 °C
Operating Temperature Ranges
Standard temperature models ( Std ): -10° C to 60° C (14° F to 140° F).
XT Industrial extended temperature models ( Ind ) : -40° C to 75° C ( -40 F to 167° F )
Storage Temperature Range
Minimum range of -25° C to 70° C (-13° F to 158° F). -40 C to 85 C (-40 F to 185 F) for industrial extended temperature models
Operating Humidity Range
5% to 90% non-condensing
Storage Humidity Range
5% to 95% non-condensing
|Maximum Heat Output||64.2 Btu/hr|
Up to 3,048 meters (10,000 feet)
metal with an IP20 ingress protection rating
Din Rail Mountable
DIN Rail attachment included. Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175.
Removable to accommodate optional Panel/Wall mount kit
|Product Weight and Dimensions|
75 x 130 x 121mm
170 x 260 x 70 mm
|Standards and Certifications|
IEC 60950-1(ed 2); am1, am2
IEC 62368-1(ed 2)
UL 61010-1 and UL 61010-2-201 ( Standard for Safety for Programmable Controllers )
IEC 61010-1(ed.3), IEC 61010-2-201(ed.1)
FCC 47 Part 15 Class A
CISPR 32:2015/EN 55032:2015 (Class A)
EMC and Immunity
CISPR 24:2010/EN 55024:2010
IEC/EN 61000-4-2 (ESD) : Contact discharge +/- 4kv, Air discharge +/- 8kv
IEC/EN 61000-4-3 (RS) : 80mhz to 1Ghz ; 10v/m, 1.4Gkz to 2.0ghz ; 5 v/m, 2.0ghz to 2.7 ghz ; 5 v/m
IEC/EN 61000-4-4 (EFT) : DC power line +/- 2kv, data line +/- 1kv
IEC/EN 61000-4-5 (Surge) : DC power line, Line/Line +/- 1kv, Line/Earth +/- 2kv, data line /earth +/- 2kv
IEC/EN 61000-4-6 (CS) :150khz-80Mhz 10vrms
IEC/EN 61000-4-8 (Magnetic Field) :30 A/M
IEC/EN 61000-6-2 ( General Immunity in Industrial Environments )
UL 61010-1 and UL 61010-2-201 ( Standard for Safety for Programmable Controllers ). Formerly known as UL508 (Safety standard for Industrial Control Equipment )
Hazardous Locations ( Hazloc )
ANSI/ISA 12.12.01, Class 1 Division 2 Groups A-D ( formerly known as UL 1604 )
ATEX Class 1 Zone 2
EN 60079-0:2012+A11:2013 and EN 60079-15:2010
Reach, RoHS and WEEE Compliant
HTSUS Number: 8517.62.0050
5 year Warranty