中国电气传动网

第一电气传动平台



总访问量:278456

关键词搜索:

  • 电机
  • 济南鑫贝西
  • 上海仪电
  • 英国马尔文
  • 传感器
  • 发电机
  • 机器人
  • 工业机器人
  • 数控

扫一扫

了解更多

SMI-4GPT-DSFP光纤转换器

点击图片查看原图
 
单价: 面议
品牌: Perle
销量: 累计出售 0
评价: 已有 0 条评价
人气: 已有 70 人关注
更新: 2019-07-23
数量: 减少 增加件 库存100件
立即购买   加入购物车   点击询价
       
 
公司基本资料信息
 

Perle SFP到SFP协议和速率透明的托管媒体转换器使网络管理员能够通过光纤到光纤模式转换将多种光纤类型和波长合并到网络中或网络之间。 与更换网络设备上的光学刀片相比,使用此技术可显着节省成本。 通过转换,在网络安全性至关重要的环境中轻松扩展LAN:

多模到多模

多模到单模

单模式到单模式

双芯到单光纤(双工到单工BiDi)


SMI-4GPT Managed Media Converters support all authentication, authorization and accounting (AAA) security services used in corporate networks, including TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA. To further protect ID’s and passwords from someone ‘snooping’ on the network, Perle Managed Media Converters provide secure management sessions by supporting SSH, SNMPv3, Telnet and HTTPS. These types of features are used when managing your corporate firewalls, switches and routers. This is why Perle makes them available in the SMI-4GPT Managed Media Converter.  SFP to SFP Media Converters are also available for unmanaged applications.

SFP to SFP Conversion

The SMI-4GPT Fiber Mode Converter comes with two empty SFP slots. This allows for flexible network configurations using SFP fiber transceivers supplied by PerleCisco or other manufacturers of MSA compliant SFPs. Adapting to different fiber types, distances and wavelengths is made simple by mixing and matching SFP’s as needed for maximum flexibility across a variety of topologies and network architectures. The hot-swappable nature of SFPs allow for easy configuration and future upgrades as network demands evolve by simply upgrading a single SFP instead of replacing the entire fiber mode converter. 

Convert different wavelengths ( WDM Transponders )

SFP transceivers also enable the SMI-4GPT Fiber Mode Converter to operate as a Wave Division Multiplexing (WDM) transponder. Also referred to as Bi-Directional ( BiDi ) or Simplex, WDM Transponders help network administrators take advantage of the cost savings in both material and labour associated with Single Strand Fiber. WDM uses separate transmit and receive frequencies to communicate on a single fiber strand. WDM technology relies on the fact that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength. Thus, a single fiber can carry many separate wavelength signals or channels simultaneously. WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM).

SMI-4GPT Fiber Mode Converter Features

Network Administrators can “see-everything” Perle’s advanced features such as Smart link Pass-Through and Fiber Fault alert. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make the SMI-4GPT Fiber Mode Converter the smart choice for IT professionals.

Protocol Transparency

Transparent to all protocols ( including but not limited to )

  • Ethernet : 10base-FL

  • Fast Ethernet : 100base-X

  • Gigabit Ethernet ( 1.25G , 2.5G ) : 1000base-X

  • GR-253-CORE : ATM/SonET ( OC-3, OC-12, OC-48 )

  • G.957 : SDH ( STM-1, STM-4, STM-16 )

  • Fibre Channel: ( FC-1, FC-2, FC-4 )

  • FDDI, IBM protocols ESCON and FICON

  • Video protocols ( DVB, SDI, HD-SDI, SMTPE )

Rate TransparencySupports SFP data rates up to 4.25Gbps.
Smart link Pass-ThroughSmart link Pass-Through when enabled ensures that the link state on a fiber connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter. This feature applies when both SFP slots are occupied.

If set in Standard Mode, the link is kept active. The unit will transmit a 25Mhz keep-alive signal to artificially keep the link up.
Fiber Fault alertIf the media converter module detects a loss of fiber, it will immediately notify the fiber link partner that an error condition exists.
Configuration Mode selectionSelect whether to use the on-board DIP switches or the management software for mode selection..
Converter Information
  • Media converter model and serial

  • User configurable name

  • User configurable fiber port name

  • User configurable copper port name

  • Hardware revision number

Module DIP switch settingsView hardware DIP switch settings
Rate Select

Specify SFP rate select ( used with rate selectable SFP’s with line rates up to 4.25G )

  • High Speed ( default )

  • Low Speed

Port ControlEnable or disable individual SFP ports on the module.
SFP Status
  • DOM / DMI Optical monitoring of:

  • SFP temperature

    • TX supply voltage

    • TX bias current

    • TX output power

    • RX received optical power

  • Port Enabled (Yes/No)

  • link Status (Up/Down)

  • Far End Fault (OK, Failed )

Control
  • Reset

  • Reset to factory default

  • Update firmware

  • Upload/download configuration

SMI-4GT-DSFP Advanced Management Features

Enterprise and carrier-grade security is available through the support of strong authentication systems such as TACACS+, RADIUS and LDAP. Secure in-band access is assured via SNMPv3, SSH CLI and secure HTTPS Internet browser.

SNMP
  • Full read/write capabilities via central SNMP servers and PerleVIEW

  • Send SNMP traps ( up to 4 servers )

  • SNMPv3, V2C and V1

  • SNMPv3 – encryption and authentication for both management and trap support

  • RFC1213 MIB II

  • Proprietary MIB provided

Telnet / SSH CLI accessIn-band command line access via Telnet or SSH application
Internet Browser access
  • Fast and intuitive graphical web interface for use with common internet browsers such Internet Explorer, Mozilla Firefox and Safari

  • HTTP or secure HTTPS

  • PerleVIEW Centralized Management Package

Console port CLI accessOut-of-band command line access via Cisco compatible RJ45 serial console port using common “rolled” CAT5 cable.
Console port can be enabled ( default ) or disabled
Concurrent management sessionsRun multiple management sessions simultaneously for multiple users
Inactivity timeoutProtect secure management sessions by setting an inactivity timeout value
alert event reportingalert level events are stored in the local event log and sent as:
  • SNMP traps to up to 4 servers

  • SYSLOG messages to a SYSLOG server

  • Email to user defined email address

Advanced IP feature set
  • IPV4 and IPV6 address support

  • DHCP

  • DNS

  • Dynamic DNS

  • NTP

  • TFTP

  • Telnet

  • SSH V2 and V1

  • HTTP

  • HTTPS

Advanced Management User Authentication with primary and secondary server support
  • TACACS+

  • RADIUS

  • LDAP

  • Active Directory via LDAP

  • RSA Secure ID-agent or via RADIUS authentification

  • Kerberos

  • NIS

Advanced Management User Authorization and Accounting
  • TACACS+

  • RADIUS

Encryption
  • AES (256/192/128), 3DES, DES, Blowfish, CAST128, ARCFOUR(RC4), ARCTWO(RC2)

  • Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96, and MD5-96

  • Key exchange: RSA, EDH-RSA, EDH-DSS, ADH

  • X.509 Certificate verification: RSA, DSA

Access Control ListAn access control list can be created which can filter out only those workstations that are authorized to access the management resources. Filter on IP and/or Ethernet MAC addresses
Network Services FilterEnable only those network services on the management module that are allowed on your network ( Telnet, SSH, HTTP, HTTPS, SNMP )
Firmware downloadUpdate the latest level firmware via TFTP or PerleVIEW


硬件:

Power
Input Supply Voltage( 12 vDC Nominal )
Current.5A at 12v DC
Power Consumption6 watts
Power Connector5.5mm x 9.5mm x 2.1mm barrel socket
Power Adapter
Universal AC/DC Adapter100-240v AC, regulated DC adapter included
Media Converter Module Indicators
PowerThis green LED is turned on when power is applied to the media converter. This LED is off when there is no power supplied.

A Blinking LED will indicate that a hardware error has been detected.

LK1LED is ON when a signal is detected on LK1. LED is OFF when there is no signal.
LK2LED is ON when a signal is detected on LK2. LED is OFF when there is no signal.
Switches ( on-board media converter module )
link ModeSmart link Pass-Through when enabled ( Default ) ensures that the link state on a fiber connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter. This feature applies when both SFP slots are occupied.

If set in Standard Mode, the link is kept active. The unit will transmit a 25Mhz keep-alive signal to artificially keep the link up.

Fiber Fault alertIf the media converter module detects a loss of fiber, it will immediately notify the fiber link partner that an error condition exists.

Disabled ( Default ). The Media Converter will not monitor for fiber fault.

Multi-speed SFPWhen enabled, identifies that the SFPs inserted are MSA complaint SFPs that have a multi-rate capability SFF-8074 and SFF-8472.

When disable ( Default ), no action is performed in this context.

Rate SelectThis enables rate selection when using dual-rate capable SFPs. If the “Multi-Speed SFP” select switch is in the “Disabled” position, this switch is ignored.

High Speed - UP ( default )

Low Speed – DOWN

2 x SFP Slots
SFPsSFP line rates up to 4.25Gbps are supported. The SFPs occupying each slot in the media converter however must be operating at the same speed.

SFP power level 1 and 2 are supported.

Management Module Indicators / reset
PowerBlinking green during startup cycle
Steady green: module has power and is ready
Red : error
ALMRed alarm indicator activated when an alert event occurs
LKCGreen indicator indicating an active Ethernet link. Blinking indicates RX and TX of data
100/1000Green - 1000 Mbps link
Yellow - 100 Mbps link
Off - 10 Mbps or no link
Reset ButtonRecessed pinhole button resets management module
Environmental Specifications
Operating Temperature0° C to 50° C (32° F to 122° F)
Storage Temperatureminimum range of -25° C to 70° C (-13° F to 158° F).
Operating Humidity5% to 90% non-condensing
Storage Humidity5% to 95% non-condensing
Operating AltitudeUp to 3,048 meters (10,000 feet)
Heat Output
( BTU/HR )
20.5
MTBF*290,742 w/o adapter
188,528 w/ adapter
Chassismetal with an IP20 ingress protection rating
Product Weight and Dimensions
Product Weight0.75 Kg
Product Dimensions175 x 145 x 24 mm
Packaging
Shipping Weight1.2 Kg
Shipping Dimensions20 x 30 x 7 cm
Regulatory Approvals
EmissionsFCC Part 15 Class A, EN55022 Class A
CISPR 22 Class A
CISPR 32:2015/EN 55032:2015 (Class A)
CISPR 24:2010/EN 55024:2010
EN61000-3-2
ImmunityEN55024
Electrical SafetyUL 60950-1
IEC 60950-1(ed 2); am1, am2
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
CE
Laser SafetyDependent on SFPs used. SFPs that meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11 are recommended for use with this product.
EnvironmentalReach, RoHS and WEEE Compliant
OtherECCN: 5A991
HTSUS Number: 8517.62.0050
CCATS: G134373
Perle Limited Lifetime Warranty