中国电气传动网

第一电气传动平台



总访问量:278449

关键词搜索:

  • 电机
  • 济南鑫贝西
  • 上海仪电
  • 英国马尔文
  • 传感器
  • 发电机
  • 机器人
  • 工业机器人
  • 数控

扫一扫

了解更多

S-4GPT-DSFP-XT光纤转换器

点击图片查看原图
 
单价: 面议
品牌: Perle
销量: 累计出售 0
评价: 已有 0 条评价
人气: 已有 54 人关注
更新: 2019-07-23
数量: 减少 增加件 库存100件
立即购买   加入购物车   点击询价
       
 
公司基本资料信息
 

Perle功能丰富的SFP到SFP工业协议和速率透明媒体转换器使网络管理员能够在-40F到+ 167F的操作环境中通过光纤到光纤模式转换将多种光纤类型和波长合并到网络中或网络之间。 与更换网络设备上的光学刀片相比,使用此技术可显着节省成本。 通过转换,轻松将网络扩展到远程位置:

多模到多模

多模到单模

单模式到单模式

双芯到单光纤(双工到单工BiDi)

SFP to SFP Conversion

The S-4GPT-DSFP-XT Industrial Fiber Mode Converter comes with two empty SFP slots. This allows for flexible network configurations using SFP fiber transceivers supplied by PerleCisco or other manufacturers of MSA compliant SFPs.  Adapting to different fiber types, distances and wavelengths is made simple by mixing and matching SFP’s as needed for maximum flexibility across a variety of topologies and network architectures.  The hot-swappable nature of SFPs allow for easy configuration and future upgrades as network demands evolve by simply upgrading a single SFP instead of replacing the entire fiber mode converter.

Fully designed to operate in extreme temperatures

There are others products on the market claiming to operate at -40F to +175F but, they use “commercial-grade” parts that have not been qualified by the manufacturer (OEM) to operate at the claimed temperature ranges. When “commercial-grade” parts are exposed to extremely high or low temperatures, product failures are inevitable. For example, integrated circuits on the PCB overheatcausing premature failure of the product. Under-rated connectors do not allow for proper contact between the device and the cables. These failures eventually stop all data communications in these high and low temperature environments.

Perle understands the critical nature of the traffic management, oil and gas pipelines, weather tracking, industrial and outdoor applications where customers are deploying this technology.  Often, they are connecting security cameras, wireless access points, alarms, traffic controllers, sensors or tracking devices in remote or difficult to access locations. Unreliable products made with standard components simply won’t work. This is why all Perle Industrial Temperature Media Converters only use components that are fully qualified and rated to operate in -40F to +175F.

Convert different wavelengths ( WDM Transponders )

SFP transceivers enable the S-4GPT-DSFP-XT Industrial Fiber Mode Converter to operate as a Wave Division Multiplexing (WDM) transponder. Also referred to as Bi-Directional ( BiDi ) or Simplex, WDM Transponders help network administrators take advantage of the cost savings in both material and labour associated with Single Strand Fiber. WDM uses separate transmit and receive frequencies to communicate on a single fiber strand. WDM technology relies on the fact that optical fibers can carry many wavelengths of light simultaneously without interaction between each wavelength. Thus, a single fiber can carry many separate wavelength signals or channels simultaneously. WDM systems are divided into different wavelength patterns, conventional/coarse (CWDM) and dense (DWDM).

S-4GPT-DSFP-XT Industrial Fiber Mode Converter Features

Network Administrators can “see-everything” with Perle’s advanced features such as Smart link Pass-Through and Fiber Fault alert. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make the S-4GPT-DSFP-XT Industrial Fiber Mode Converter the smart choice for IT professionals.

Protocol TransparencyTransparent to all protocols ( including but not limited to )

  • Ethernet : 10base-FL

  • Fast Ethernet : 100base-X

  • Gigabit Ethernet ( 1.25G , 2.5G ) : 1000base-X

  • GR-253-CORE : ATM/SonET ( OC-3, OC-12, OC-48 )

  • G.957 : SDH ( STM-1, STM-4, STM-16 )

  • Fibre Channel: ( FC-1, FC-2, FC-4 )

  • FDDI, IBM protocols ESCON and FICON

  • Video protocols ( DVB, SDI, HD-SDI, SMTPE )

Rate TransparencySupports SFP data rates up to 4.25Gbps.
Smart link Pass-ThroughSmart link Pass-Through when enabled ensures that the link state on a fiber connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter. This feature applies when both SFP slots are occupied.

If set in Standard Mode, the link is kept active. The unit will transmit a 25Mhz keep-alive signal to artificially keep the link up.
Fiber Fault alertIf the media converter module detects a loss of fiber, it will immediately notify the fiber link partner that an error condition exists.
Power Strain Relief strapA strain relief strap is provided to ensure a solid and secure power connection to the media converter. Ideal for areas that may be exposed to any vibration.


硬件:

Power
Input Supply Voltage6 - 30 vDC, unregulated ( 12 vDC Nominal ). Regulated power adapter is not included
Current325mA @ 12VDC
Power Consumption4 watts
Power Connector2-pin terminal block
Indicators
PowerThis green LED is turned on when power is applied to the media converter. This LED is off when there is no power supplied.

A Blinking LED will indicate that a hardware error has been detected.

LK1LED is ON when a signal is detected on LK1. LED is OFF when there is no signal.
LK2LED is ON when a signal is detected on LK2. LED is OFF when there is no signal.
Switches - accessible through a side opening in the chassis
link ModeSmart link Pass-Through when enabled ( Default ) ensures that the link state on a fiber connection is directly reflected through the media converter to the other connection. If link is lost on one of the connections, then the other link will be brought down by the media converter. This feature applies when both SFP slots are occupied.

If set in Standard Mode, the link is kept active. The unit will transmit a 25Mhz keep-alive signal to artificially keep the link up.

Fiber Fault alertIf the media converter module detects a loss of fiber, it will immediately notify the fiber link partner that an error condition exists.

Disabled ( Default ). The Media Converter will not monitor for fiber fault.

Multi-speed SFPWhen enabled, identifies that the SFPs inserted are MSA complaint SFPs that have a multi-rate capability.

When disable ( Default ), no action is performed in this context.

Rate SelectThis enables rate selection when using dual-rate capable SFPs. If the “Multi-Speed SFP” select switch is in the “Disabled” position, this switch is ignored.

High Speed - UP ( default )

Low Speed – DOWN

2 x SFP Slots
SFPsSFP line rates up to 4.25Gbps are supported. The SFPs occupying each slot in the media converter however must be operating at the same speed.

SFP power level 1 and 2 are supported.
Environmental Specifications
Operating Temperature-40° C to 75° C (-40° F to 167° F)
Storage Temperatureminimum range of -40° C to 85° C (-40° F to 185° F)
Operating Humidity5% to 90% non-condensing
Storage Humidity5% to 95% non-condensing
Operating AltitudeUp to 3,048 meters (10,000 feet)
Heat Output
( BTU/HR )
13.65
MTBF*902,294
Chassismetal with an IP20 ingress protection rating
Mounting
Din Rail KitOptional
Wall / Rack Mount KitOptional
Product Weight and Dimensions
Weight0.3 Kg, 0.7 lbs
Dimensions120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches
Packaging
Shipping Weight0.45 Kg, 1.0 lbs
Shipping Dimensions170 x 260 x 70 mm, 6.7 x 10.2 x 2.8 inches
Regulatory Approvals
EmissionsFCC Part 15 Class A, EN55022 Class A
CISPR 22 Class A
CISPR 32:2015/EN 55032:2015 (Class A)
CISPR 24:2010/EN 55024:2010
EN61000-3-2
ImmunityEN55024
Electrical SafetyUL 60950-1
IEC 60950-1(ed 2); am1, am2
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
CE
Laser SafetyDependent on SFPs used. SFPs that meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11 are recommended for use with this product.
EnvironmentalReach, RoHS and WEEE Compliant
OtherECCN: 5A991
HTSUS Number: 8517.62.0050
Perle Limited Lifetime Warranty


选型: