中国电气传动网

第一电气传动平台



总访问量:314976

关键词搜索:

  • 电机
  • MapleSystems
  • 发电机
  • 传感器
  • Perle
  • 机器人
  • TSINGBO
  • 工业机器人
  • 数控

扫一扫

了解更多

eX-SM1110管理型千兆以太网扩展器

点击图片查看原图
 
单价: 面议
品牌: Perle
销量: 累计出售 0
评价: 已有 0 条评价
人气: 已有 123 人关注
更新: 2019-09-03
数量: 减少 增加件 库存100件
立即购买   加入购物车   点击询价
       
 
公司基本资料信息
 

10/100/1000以太网扩展器允许您使用先前在报警电路,E1/T1电路,RS-232,RS-422,RS-485中使用的任何现有铜线,将以太网服务扩展到328英尺/100米的一般IEEE 802.3限制之外,CCTV和CATV应用。 对于扩展10/100/1000 LAN并且网络安全至关重要的环境,Perle提供托管千兆以太网扩展器,支持企业网络中使用的所有身份验证,授权和记帐(AAA)安全服务,包括TACACS+,RADIUS,LDAP,Kerberos,NIS和RSA。为了进一步保护网络上某人'窥探'的ID和密码,Perle Managed Ethernet Extenders通过支持SSH,SNMPv3,Telnet和HTTPS提供安全的管理会话。管理企业防火墙,交换机和路由器时使用这些类型的功能。这就是为什么Perle在eX-SM1110管理型以太网扩展器中提供它们的原因。


These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments and remote offices … anywhere you need the ability to securely configure, monitor and manage long range Ethernet communication links between separated LANs or LAN devices (i.e. PCs, digital sensors, VoIP phones, WiFi Access Points, IP cameras and more).

You will also appreciate how easy it is to set up the eX-SM1110 with an intuitive Web Manager GUI and multiple methods of access. And, with support for IPv6, Perle Managed Ethernet Extenders provide organizations with investment protection to meet this rapidly growing standard. For high density applications check out the eX-CM1110 Managed Fast Ethernet Extender Modules.

10/100/1000 Ethernet Extenders are also available as unmanaged standalone models with support for Commercial Temperature ranges and Extended Temperature ranges.

eX-SM1110 Managed Gigabit Ethernet Extender Features

Perle’s advanced features such as link Pass-Through, Interlink Fault Feedback, and Loopback allow Network administrators to “see everything” for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle eX-SM1110 Managed Ethernet Extenders the smart choice for IT professionals.

Extend Ethernet over twisted pairExtend an Ethernet link over category 5e, 6 and 7 cabling up to 10,000 feet ( 3 km ).
Extend Ethernet over Coaxial cableExtend an Ethernet link over 75 ohm coaxial cable.
High-Speed PerformanceUtilizes second generation VDSL2 technology ( ITU-T Recommendation G.993. ) . When operating under “Profile 30a”, Perle Ethernet extenders can provide an aggregate VDSL line rate capability of over 200 mbps.
Actual distance and performance may vary depending on the type / gauge and condition of the wire used.
Plug and Play operationPerle Ethernet Extenders will automatically configure your VDSL interlink connection. The CO/CPE peer association will be determined automatically by the Ethernet Extender. No need to set CO / CPE VDSL pairing.

once a connection is made, both ends will automatically adjust relevant VDSL parameters to optimize the level of bandwidth possible across the copper link.
link Pass-ThroughWith link Pass-Through the state of the 10/100/1000base-T Ethernet connection is “passed through” the VDSL link to the 10/100/1000base-T Ethernet connection on its remote peer. A managed switch on the remote end can then report the state (link up or link down) to its network management system so that any errors can be detected and recovered early.

Competitive Ethernet extenders without this feature will never detect or report any error conditions.
Interlink Fault FeedbackSimilar to the link Pass-Through feature, a loss of VDSL Interlink will drop the 10/100/1000 Ethernet ports on each end until the link recovers.
Auto-NegotiationThe Ethernet Extender supports auto negotiation on the 10/100/1000base-T interface.
Auto-MDIXAuto-MDIX (Automatic Medium-Dependent Interface crossover) detects the signaling on the 10/100/1000 Ethernet RJ45 interface and determines the type of cable connected (straight-through or crossover) and automatically adopts a compatible pinout.
Fixed Speed and DuplexSome Ethernet equipment require a fixed speed and duplex be used or cannot auto-negotiate. By disabling Auto-Negotiation on the Ethernet Extender, a fixed speed of 10, 100 or 1000 mbps as well as Full or half Duplex can be configured through DIP switches.
VLANTransparent to tagged VLAN ( 802.1Q ) packets.
Transparent to IP Video compression protocolsFully transparent to such IP video compression schemes such as MPEG-4, H.264 and MJPEG.
VDSL Configuration
  • Enable/Disable  port

  • Set Port Name – Up to 8 characters

  • Set Role : Auto (Default) ,Local (CO), Remote (CPE)

  • Set Rate/Reach : High-Speed (default) , Long-Range

  • Set Symmetry : Asymmetric, Symmetric (default)

  • Set Low Bandwidth Alarm – SNMP trap

  • Select VDSL profile

  • Select Signal to Noise Ratio

  • Select upstream/downstream data rate

Quality of Service
  • Bandwidth Allocation via rate limiting

  • IEEE 802.1P tagged frame priority control

  • IEEE 802.1P priority tag remapping

  • IP TOS ( Type of Service ) priority for IPV4 Diffserv or IPV6 traffic class frames

  • Congestion Service Policy through WQF ( Weighted Fair Queuing ) or Strict Priority Queuing ( default )

VLAN Tagging
  • Default – Transparent to VLAN frames

  • Enable discarding of tagged frames

  • Enable discarding of untagged frames

  • Untag – Removes any existing tag

  • Insert Tag – Insert (if original frame is untagged) or replace (if original frame is tagged) the VLAN ID and priority with the configured default VLAN ID and priority tag.

  • Insert Double tag (Q in Q) – Append an additional tag using the configured default VLAN ID and priority.

Unknown Multicast frame filteringWhen enabled, Multicast frames with an unknown destination address are not allowed to egress the port.
Unknown Unicast frame filteringWhen enabled, Unicast frames with an unknown destination address are not allowed to egress the port.
Unidirectional EthernetWhen enabled, provides the ability to restrict port to one-way traffic flow. Used in applications such as unidirectional video broadcasting as well as providing security for Ethernet connections in accessible public areas.
Configuration Mode selectionSelect whether to use the on-board DIP switches or the management software for mode selection.
Auto-MDIXCan manually set Auto or MDIX on the copper port via on-board strap or via the management software. Auto-MDIX (automatic medium-dependent interface crossover) detects the signaling on the UTP interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. With Auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the Ethernet Extender to the device on the other end of the cable.
Converter Information
  • User configurable Ethernet Extender name

  • User configurable VDSL-Interlink port name

  • User configurable copper port name

  • Hardware revision number

  • Firmware version number

DIP switch settingsView hardware DIP switch settings.
10baseT Extended DistanceNormal/extended – default Normal. By configuring as “extended”, the 10baseT receiver sensitivity is increased providing the possibility of a 10baseT connection greater than 100m.
Copper Port Status
  • Port Enabled (Yes/No)

  • link Status (Up/Down)

  • Auto Negotiation Settings (Disabled, Complete or In Progress)

  • Resolved as crossover MDI or MDIX type

VDSL Port Status
  • Port Name

  • Connector Type

  • link State

  • Idle

  • Handshake

  • Training

  • Up

  • Loopback status

  • Remote Loopback (loopback status of VDSL peer)

  • Role : Local (CO) , Remote (CPE)

  • Current VDSL Profile

Control
  • Reset

  • Reset to factory default

  • Reset Statistical counters

  • Update firmware

  • Loopback mode. (On/Off)

  • Upload/download configuration

Detailed port statisticsTo assist in troubleshooting links, an extensive list of ingress and egress counters for both copper and VDSL ports are available. These statistics can be viewed locally via the management module or from a central SNMP NMS on the network.
Pause (IEEE 802.3xy)Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The Ethernet Extender supports pause negotiation on the 10/100base-TX copper connection.
Remote LoopbackThe Ethernet Extender is capable of performing a loopback on the copper VDSL Interlink port.

eX-SM1110 Advanced Management Features

Enterprise and carrier-grade security is available through the support of strong authentication systems such as TACACS+, RADIUS and LDAP. Secure in-band access is assured via SNMPv3, SSH CLI and secure HTTPS Internet browser.

SNMP
  • Full read/write capabilities via central SNMP servers and PerleVIEW

  • Send SNMP traps ( up to 4 servers )

  • SNMPv3, V2C and V1

  • SNMPv3 – encryption and authentication for both management and trap support

  • RFC1213 MIB II

  • Proprietary MIB provided

Telnet / SSH CLI accessIn-band command line access via Telnet or SSH application.
Internet Browser access
  • Fast and intuitive graphical web interface for use with common internet browsers such Internet Explorer, Mozilla Firefox and Safari

  • HTTP or secure HTTPS

  • PerleVIEW Centralized Management Package

Console port CLI accessOut-of-band command line access via Cisco compatible RJ45 serial console port using common “rolled” CAT5 cable.
Console port can be enabled ( default ) or disabled.
Concurrent management sessionsRun multiple management sessions simultaneously for multiple users.
Inactivity timeoutProtect secure management sessions by setting an inactivity timeout value.
alert event reportingalert level events are stored in the local event log and sent as:

  • SNMP traps to up to 4 servers

  • SYSLOG messages to a SYSLOG server

  • Email to user defined email address

Advanced IP feature set
  • IPV4 and IPV6 address support

  • DHCP

  • DNS

  • Dynamic DNS

  • NTP

  • TFTP

  • Telnet

  • SSH V2 and V1

  • HTTP

  • HTTPS

Advanced Management User Authentication with primary and secondary server support
  • TACACS+

  • RADIUS

  • LDAP

  • Active Directory via LDAP

  • RSA Secure ID-agent or via RADIUS authentication

  • Kerberos

  • NIS

Advanced Management User Authorization and Accounting
  • TACACS+

  • RADIUS

Encryption
  • AES (256/192/128), 3DES, DES, Blowfish, CAST128, ARCFOUR(RC4), ARCTWO(RC2)

  • Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96, and MD5-96

  • Key exchange: RSA, EDH-RSA, EDH-DSS, ADH

  • X.509 Certificate verification: RSA, DSA

Access Control ListAn access control list can be created which can filter out only those workstations that are authorized to access the management resources. Filter on IP and/or Ethernet MAC addresses.
Network Services FilterEnable only those network services on the management module that are allowed on your network ( Telnet, SSH, HTTP, HTTPS, SNMP ).
Firmware downloadUpdate the latest level firmware via TFTP or PerleVIEW.


硬件:

Management Module Indicators / reset
PowerBlinking green during startup cycle 
Steady green: module has power and is ready
Red : error

ALMRed alarm indicator activated when an alert event occurs
LKCGreen indicator indicating an active Ethernet link. Blinking indicates RX and TX of data
100/1000Green - 1000 Mbps link
Yellow - 100 Mbps link
Off - 10 Mbps or no link

Reset buttonRecessed pinhole button resets module
Ethernet
Port1 port RJ45 – 10/100 base-TX - Shielded
Auto-MDIXAuto-MDIX enables proper operation with either straight-through or crossover cabling
DistanceDistance up to 100 meters ( 328 feet ) as per IEEE 802.3
Maximum frame Size1522 bytes
VDSL – Interlink
RJ45, BNC, Terminal Block

Ethernet Extenders must be connected in pairs using unconditioned wire. Circuits that run through signal equalization equipment are not permitted.

TIP and RING are polarity insensitive. Surge suppression of 400 volts between TIP and RING. Choice of RJ45, BNC or terminal block models for VDSL link connector:

  • RJ45 – RING pin 4, TIP pin 5 (TIA 568 A/B)

  • BNC – Coaxial 50 and 75 ohm cable with BNC connector

  • Terminal Block – 2 position screw connectors for use with twisted pair telephone, alarm or serial cabling between 19 ( 0.9 mm ) and 26 AWG ( 0.44 mm ).

VDSL2 Line Rate/ReachActual distance and rates experienced will depend on condition and gauge of wire used. This Rate/Reach table applies to 24 AWG ( 0.5 MM ) twisted pair wiring on RJ45 (RJ) and terminal block (TB) models.

High Speed AsymmetricReach ( Distance )VDSL Rate ( Mbps )feetmetersDownstreamUpstream50015210192100030510163150045790382000610622425007625510300091442535001000353High Speed SymmetricReach ( Distance )VDSL Rate ( Mbps )feetmetersDownstreamUpstream500152101101100030585101150045762472000610602925007624414300091430735001000294Long Reach SymmetricReach ( Distance )VDSL Rate ( Mbps )feetmetersDownstreamUpstream500152534410003055343250076239184000121925455001676171.97000213482.37500228672.28000243852.2Long Reach AsymmetricReach ( Distance )VDSL Rate ( Mbps )feetmetersDownstreamUpstream5001527816100030578162500762551040001219310.855001676200.670002134110.675002286100.68000243880.6

Indicators
Power / TSTThis green LED is turned on when power is applied to the Ethernet Extender. Otherwise it is off. The LED will blink when in Loopback test mode.
CO - LocalEthernet Extender is operating in CO VDSL mode
CPE - remoteEthernet Extender is operating in CPE VDSL mode
ILNKIndicates link Status and activity on the Interlink (VDSL) port
ETHIndicates link status and activity on Ethernet port.
Switches – On-board PCB
Rate/ReachTwo switches enable the user to select the right balance between speed and distance for their environment.
Signal to Noise RatioSelectable Signal to Noise Ratio (SNR) of 6dB or 9dB. The higher SNR number provides better impulse noise protection but lowers performance.
Auto-Negotiation (802.3u)Enabled (Default) - The Ethernet Extender uses 802.3u Auto-negotiation on the 10/100/1000base-T interface. It is set to advertise full duplex.

Disabled - The Ethernet Extender sets the port according to the position of the speed and duplex switches.


link ModeStandard (Default) – The 10/100/1000base-T link remains active independent of the state of the Ethernet link on its remote peer.

link Pass-Through- the state of the 10/100/1000base-T Ethernet connection is “passed through” or propagated across the VDSL link to the 10/100/1000base-T Ethernet link on its remote Ethernet Extender peer. This enables a managed switch to report the state of the remote device to its network management system.


Interlink Fault FeedbackEnabled - A loss of VDSL link will drop the 10/100 Ethernet port on each end until the link recovers

Disabled ( Default ) – The state of the VDSL link is not propagated to the 10/100/1000base-T port


LoopbackEnabled - The VDSL interlink will perform a loopback function, retransmitting all received Ethernet frames back to its peer.

Disabled (Default - Up)


Set Ethernet SpeedWhen Auto-Negotiation switch is disabled, fixed speed can be set at 100 (Default) or 10
Set Ethernet DuplexWhen Auto-Negotiation switch is disabled, Duplex can be set at Full (Default) or Half
Power
Input Voltage12 vDC ( nominal )
Current560ma @ 12 vDC
Power Consumption
( Watts )
6.7
Power Connector5.5mm x 9.5mm x 2.1mm barrel socket
AC Adapter100-240v AC, regulated DC adapter included
Environmental Specifications
Operating Temperature0 C to 50 C (32 F to 122 F)
Storage Temperatureminimum range of -25 C to 70 C (-13 F to 158 F)
Operating Humidity5% to 90% non-condensing
Storage Humidity5% to 95% non-condensing
Operating AltitudeUp to 3,048 meters (10,000 feet)
Heat Output
( BTU/HR )
22.86
MTBF (Hours)*221,305 w/o adapter
156,656 w/ adapter

Packaging
Shipping Weight1.2 Kg, 2.6 lbs
Shipping Dimensions200 x 300 x 70 mm, 7.9 x 11.8 x 2.8 inches
Regulatory Approvals
EmissionsFCC Part 15 Class A, EN55022 Class A
CISPR 32:2015/EN 55032:2015 (Class A)
EN61000-3-2
ImmunityCISPR 24:2010/EN 55024:2010
Electrical SafetyUL 60950-1
IEC 60950-1(ed 2); am1, am2
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
CE
EnvironmentalReach, RoHS and WEEE Compliant
OtherECCN: 5A991
HTSUS Number: 8517.62.0050
CCATS: G134373
Perle Lifetime warranty


选型: