MLC1-E1616P

简介

The EX-Series offers several CPU base modules available with built-in I/O that can be increased at any time by adding I/O expansion modules. Up to sixteen I/O expansion modules can be added. Most models include and RTC (real-time clock) and support for high-speed counters and PWM (pulse-width modulation) output. If you need a display, pair a PLC with one of our HMIs for enhanced functionality. Paired with free configuration software.

Certifications: UL, CE, RoHS, Class I, Div 2

Software: MAPware-7000

接口

EXPANDABLE I/O PLC, 2 SERIAL PORTS, 1 USB PORT, 16 DI, 16 DO (PNP)

参数

16 Digital Inputs

16 Digital Outputs (PNP)

Support for I/O Expansion Modules

Choose Native Ladder or IEC 61131-3 Logic

High-Speed Counters and PWM I/O Modules

Class I, Division 2 Rated

PLC SERIES

Maple Systems Stand-Alone PLCs

Maple Systems offers a complete line-up of simple, low-cost Programmable Logic Controllers (PLCs) with built-in I/O. These stand-alone PLCs use MAPware-7000, the same configuration software used with Maple's HMI + PLC product lines. Now you can program your HMI and PLC using the same software – reducing the learning curve and making it easy to share data between the HMI and PLC.

These powerful units are fully functional PLCs with digital and analog I/O that support high-speed counters and PWM (pulse width modulation). Analog I/O options support several voltage and current modes as well as RTD (resistance temperature detection) and thermocouple sensors to measure temperature.

Use our easy-to-use configuration software to program your PLC in native ladder logic or any IEC 61131-3 programming language. These PLCs support communication with both our HMI + PLC and popular HMI lines via native Modbus RTU (serial), and Modbus TCP/IP (Ethernet models only).

With support for major PLC manufacturers (Allen Bradley, GE Fanuc, Omron, Siemens, and more), you can easily add a Maple Systems PLC to your existing control system for additional I/O.

PLC Series Features

Low cost

Small package

Wide selection of I/O modules

Easy to program

Supports native ladder logic or IEC 61131-3 programming

Stand-alone PLCs with CPU and built-in I/O within a single unit

Expandable PLCs with up to 16 modules; up to 288 I/O points

DIN rail mountable

24VDC powered

Uses the same software that programs Maple's HMI + PLC series

RS232 and RS485 serial ports

Plug-In I/O Modules

Expansion modules greatly extend the capabilities of expandable Maple PLCs. We offer twelve options: Nine digital and three analog, to ensure that you can customize your PLC to maximize functionality while minimizing unnecessary costs.

Digital Modules

Digital I/O modules support as many as sixteen inputs or outputs per module, or a combination of eight inputs/outputs. These modules support:

• Bidirectional (sink or source) inputs

• PNP (source), NPN (sink), or relay outputs

• High-speed counter input (up to 25kHz)

• Pulse Width Modulation output (up to 10kHz)

Analog Modules

Analog I/O modules support as many as eight analog inputs, four analog outputs, or a combination of analog I/O.

These modules support:

• 0-10 V or 4-20 mA inputs or outputs

• 0-10 V, 0-5 V, 0-100 mV, or 0-50 mV inputs

• 4-20 mA or 0-20 mA outputs

• Support for RTD PT100 (Alpha 1 & Alpha 2)temperature inputs

• Support for Thermocouple (Types B, R, S, E, J, K, N,and T) temperature inputs